Dalingshan furniture raw material warehouse, BYD electric forklift large storage operation instructions

The Dalingshan area gathers a large number of furniture production-related enterprises. The supporting furniture raw material warehouses generally store large-scale plates, wooden squares, fabric rolls and other large-scale goods. This kind of goods have a large weight span and some outer packaging is easy to scratch and damage, which requires high adaptability to warehousing and handling operations. As a handling equipment suitable for large-scale warehousing scenarios, BYD electric forklifts can be combined with the actual working conditions of the warehouse to execute standard operation processes and better adapt to the access requirements of large-scale furniture raw materials.

In the preparation process before the start of the operation, the operator needs to confirm that the power, braking system, gantry lifting function, and fork spacing adjustment function of the BYD electric forklift are in normal condition before taking up their duties. Check in advance the types of raw materials for large pieces of furniture to be transported on the same day, and adjust the spacing and lifting starting height of the forks in advance for different sizes of plates and raw material rolls. At the same time, clean up the scattered debris in the operation passage to reserve enough safe passage space to avoid scratching the wall and bumping the shelf when turning large goods.

In the process of raw material warehousing, when large furniture raw materials arrive for unloading, first extend the fork completely into the gap of the load-bearing tray at the bottom of the goods, confirm that the force points of the two forks are evenly distributed on both sides of the center of gravity of the tray, and then slowly lift the fork to a position about 10 cm above the ground. After confirming that the goods are placed smoothly and without tilt, then drive to the corresponding warehouse area at a constant speed. Keep the vehicle running at a low speed during driving. When encountering a cross-working node in the warehouse, honk in advance. After approaching the storage shelf position, slowly adjust the vehicle position. After aligning with the cargo space, smoothly lift the door frame to the corresponding storage height. Slowly push the goods to the designated position of the shelf laminate. After confirming that the goods are completely placed smoothly, take back the fork.

In the process of raw material outbound operation, check the number of large-scale goods corresponding to the outbound order in advance, and plan the optimal pickup path. During the operation process, try to avoid meeting cars in the main channel during peak hours. When picking up and placing high-level large-scale raw materials, arrange side personnel to assist in observing the surrounding environment to avoid forks scratching other goods that have been stored around. After the daily operation, park the BYD electric forklift in the designated charging and parking area, completely drop the door frame, pull the handbrake to cut off the power, and regularly clean the sawdust and dust remaining in the gap of the fork to ensure the smoothness of the follow-up operation. After the whole set of standardized operation procedures is implemented, the handling damage rate of large-scale furniture raw materials can be effectively reduced, and the overall storage turnover efficiency of the local furniture raw material warehouse in Dalingshan can be improved.