Install BYD standard forklift maintenance, basic maintenance service content and price

In the process of high-frequency operation, regular compliance basic maintenance is the core link to ensure the stable operation of equipment and prolong the service life of vehicles. Many users hope to clarify the specific service scope of basic maintenance under the standard maintenance system, as well as open and transparent charging rules, to avoid the additional cost consumption caused by irregular maintenance.

The first part of the basic maintenance service for BYD standard forklifts is the routine inspection of the appearance and mechanical parts of the whole vehicle. According to the unified operating specifications, the maintenance personnel first conduct a full-dimensional investigation of the vehicle shell, clean up the accumulation of dust and debris in the shell gap, and check the risk of exposed internal lines caused by collision and damage. Then check and tighten all the fasteners connected to the body one by one to avoid the hidden danger of loose screws in long-term high-frequency operations. The follow-up will carry out no-load walking tests to check the running status of the steering system and walking wheels one by one, find potential cards and abnormal noise problems in a timely manner, and clearly register the wear of the wheels and inform the user.

The second part is the power and circuit system special project maintenance, basic maintenance process will be on the power battery shell integrity, wiring port fastness, heat dissipation air duct patency to do a comprehensive investigation, clean up the accumulation of debris in the air duct, to avoid poor heat dissipation affect the normal performance of the battery, while checking the integrity of the insulation layer of the whole car wiring harness, check the line aging, exposed potential hazards, the conventional operation parameters of the electronic control system to do calibration adjustment, to ensure that the power output is set in the original reasonable range.

The third part is the maintenance of hydraulic and operating components. The staff will check the leakage hazard of the lift hydraulic system of the forklift, check the liquid level status and oil permeability of the hydraulic oil, and supplement the hydraulic oil that meets the specifications as needed. At the same time, the sensitivity of the operating handle, brake pedal, parking brake and other components will be adjusted and calibrated, and the accumulated debris in the operation area will be cleaned up to ensure the smooth operation of the whole process.

The corresponding basic maintenance services in the current installation area are all clearly publicized, and there is no invisible consumption item. The charging standard will be distinguished according to the rated load parameters of the vehicle. The basic maintenance pricing of conventional small-tonnage models is in the close-to-the-people range. The whole process is strictly implemented in accordance with the unified maintenance specifications. After the maintenance is completed, a clear description of the current status of the vehicle will be issued to the user, and the component nodes that need to be paid attention to in the subsequent period will be marked. Regular completion of basic maintenance as required can greatly reduce the probability of subsequent vehicle sudden failures and reduce the operation losses caused by unplanned outages. Users with maintenance needs can make an appointment for docking in advance. The staff will arrange the door-to-door time reasonably according to the user's operation schedule to minimize the impact on daily production operations.