Dalingshan BYD electric forklift after-sales, dust environment model cleaning and maintenance instructions

In many local processing, manufacturing, and material transfer plants in Dalingshan, various types of floating dust such as sawdust, metal powder, and particulate matter are commonly found in the operation scene. Electric forklifts operate at high frequencies in such environments for a long time, and it is easy to cause dust accumulation, blockage of ventilation, and stagnation of moving parts, which affect the normal operation of the equipment. Combined with the standardized service specifications of local after-sales services, we have sorted out the classification cleaning and maintenance guidelines for electric forklifts suitable for dust environments for the reference of the majority of users.

The first is the daily pre-shift basic cleaning operation. Before each start of vehicle operation, the operator can first use a dry soft brush to clean the exposed heat grille of the body, the gap of the operating handle, and the floating dust in the gap of the pedal. During the cleaning process, it is strictly forbidden to use high-pressure water flow to directly initialize the electric control box and battery interface area. You can use a dust-free cloth dipped in a small amount of anti-static special cleaner to wipe the dust accumulation of the shell to avoid dust entering the interior of the electronic control component along the gap and causing minor faults such as poor contact.

Secondly, the weekly deep cleaning and maintenance content. After all the operations are completed every week, the operator can lift the special dust cover near the body top frame after the vehicle is left powered off for two hours, clean the dust accumulated under the cover, synchronously check the sensor gap around the driving wheel for dust stuck, and focus on cleaning the ventilation and heat dissipation holes of the battery shell to ensure smooth air circulation. If the inspection finds that the body sealing strip has signs of aging and wear, you can directly contact the local after-sales network in Dalingshan to apply for replacement of accessories to avoid the decline of dust resistance.

Finally, the monthly special project maintenance investigation. For each full month of use cycle, it is recommended to contact the professional maintenance personnel of the local after-sales service to come to the door, do a comprehensive dust removal treatment on the inside of the motor cabin, check whether the dust cover of each wiring harness interface of the body is displaced and loose, clean up the stubborn dust accumulation in the gap of the counterweight block, avoid the accumulation of dust and corrosion of the metal structure after moisture, and do a special project cleaning on the gap of the brake brake assembly to prevent dust from entering the brake pad gap and affecting the braking sensitivity.

Electric forklifts that have been used in dusty environments for a long time can effectively reduce the probability of unnecessary failures, extend the service life of the core components of the vehicle, and ensure the smooth and safe transfer operation of the factory throughout the process.