Shilou Lingang transit warehouse, BYD outdoor forklift open storage operation reference

The Shilou Lingang Transit Warehouse assumes the core functions of bulk cargo distribution and transit temporary storage in the surrounding area. The open-air operation area accounts for a high proportion, and it needs to deal with the unique high-humidity environment of Lingang, non-paved temporary operation roads, open bulk cargo storage and transshipment, etc. The outdoor electric forklift adapted to the site attributes is an important supporting equipment to ensure the smooth operation and reduce long-term operating costs.

In the early preparation of daily open-air operations, relevant operators should do a pre-inspection in combination with the site characteristics of the stone building Lingang transit warehouse. Lingang open-air areas are prone to residual fine cargo residues on the road, local water accumulation after rain, and slight ground settlement in long-term rolling areas. Before starting the operation of the outdoor forklift, the operator can first complete the appearance verification around the car, clean up the gravel and debris embedded in the tire pattern, confirm that the tire pressure is in the standard range required by the equipment, and check whether the closed state of the exposed sealing parts of the whole vehicle is in good condition. Check the wind and precipitation warning information of the day in advance. When the weather conditions exceed the outdoor operation adaptation range marked by the equipment, adjust the operation schedule in time, and do not rashly carry out high-height stacking, heavy-duty long-distance transshipment and other open-air operations.

In the process of officially launching the open-air storage operation, the operator can reasonably plan the driving route according to the rhythm of the cargo turnover in the port warehouse, avoid the temporary stacking of bulk cargo parts, raised ground piles and drainage grilles in the open-air area, and control the driving speed at a uniform speed during heavy-duty climbing or curve traffic to avoid unnecessary losses caused by sudden braking. For different types of open-air stacking goods, adjust the adaptation angle of the fork and lift the goods lightly, which can not only reduce the collision loss of the goods, but also avoid abnormal wear and tear of the load-bearing parts of the body.

The operation and maintenance link after the daily operation should also match the special environment of the Lingang site for maintenance. The salt content in the air in the Lingang area of Shilou is higher than that in the inland park. After the open-air operation, you can regularly wipe the residual dust and salt mist adhesion layer outside the forklift body with a gentle cleaning method, check the sealing of the battery compartment, walking motor, and hydraulic system, and carry out routine maintenance according to the official maintenance cycle. If you need to idle the vehicle for a long time, park the vehicle in the designated rain-proof parking area, and do a good job of residual power control to ensure that it can be put into normal operation at any time in the future.

This set of open-air operation reference plan combined with the actual scene of the Shilou Lingang transit warehouse can help the warehouse operator better play the equipment performance of outdoor electric forklifts, ensure the smooth and orderly development of open-air transit warehousing operations, and gradually improve the overall operation efficiency of the park's cargo transit.