Changping hardware raw material finished warehouse, BYD electric forklift mixed storage operation instructions

The raw material and finished product warehouses of many hardware manufacturing enterprises in Changping area also undertake multiple functions such as temporary storage of hardware raw materials, transit of process work in progress, classification and storage of finished products, and transfer of orders out of the warehouse. Heavy metal raw materials, scattered hardware rough parts, and finished goods packaged by standardized pallets are stacked in the storage space at the same time. The traffic width and load-bearing requirements of different cargo spaces are different, which belongs to a typical multi-type goods mixed storage scenario. In such scenarios, the use of electric forklifts for daily operations requires a clear operation specification to be sorted out in combination with site characteristics to ensure safe and smooth operation.

Before the operation starts, the operator needs to check the warehousing work order of the day, clarify the type of goods to be transshipped on the day, the distribution of the operation area, and check the remaining power of the electric forklift, the response status of the braking system, and the operation flexibility of the lifting gantry in advance to confirm that the vehicle does not have any hidden dangers. Then the operator should adapt the specifications of the goods to be transferred in advance, adjust the spacing of the forks, and ensure that the forks can fully extend into the support position at the bottom of the cargo pallet to avoid the problem of uneven force during the lifting process. At the same time, plan the operation line in advance to avoid the operation area where manual inventory and manual sorting are being carried out in the warehouse, and reduce unnecessary movement line crossovers.

Entering the formal operation link, for the heavy-duty hardware raw material transfer operation in the raw material area, the operator should control the speed of the forklift in the low-speed range required by the warehousing management, sound the horn in advance at the corner of the channel and the position where the line of sight is blocked, and the door frame should be properly tilted back to ensure the stability of the loaded heavy goods. During the driving process, the bottom of the fork should be kept at a safe height from the ground to avoid scratching the small hardware accessories scattered on the ground. For the stacking operation in the finished product area, the operator should adjust the speed smoothly when operating the lifting door frame, gently align the position of the goods to be stacked, and avoid bumping the finished product outer packaging that has been placed around. After the goods are placed, they should be smoothly pulled away from the fork, and do not take the goods in the adjacent cargo space.

After the daily cross-regional mixing operation is completed, the operator should park the electric forklift to the charging parking area designated by the warehouse, place the fork completely flat on the ground, tighten the handbrake of the vehicle, and do a good job in the operation registration of the day. The whole operation process fits the actual use needs of the Changping hardware raw material finished product warehouse, which can gradually optimize the warehousing turnover efficiency, reduce the risk of unnecessary goods damage, and ensure the orderly development of the whole process of warehousing operations.