Shijiao new material raw material warehouse, BYD industrial forklift special storage operation instructions

Shijiao new material raw material warehouse belongs to the exclusive storage area with high requirements for the cleanliness and safety of the working environment. The raw materials stored in the warehouse are mostly industrial-grade new material raw materials under classification and control. There are generally high upper limit of stack height, narrow transfer channel, and some areas have dustproof and anti-static requirements. Conventional transfer equipment is difficult to adapt to the needs of the whole scene operation. The BYD industrial-grade forklift put into use this time has made directional adaptation for the characteristics of the scene. All personnel involved in the operation need to strictly follow the exclusive operation instructions to complete the operations and ensure the compliance of the whole process.

Before the operator starts the vehicle to drive into the storage area, the whole process of point inspection needs to be completed. First of all, it is necessary to confirm that the static electricity export device of the forklift is in normal operation, there are no sharp bumps on the surface of the fork or damage points that are easy to scratch the tray, the dust-proof sealing parts around the vehicle are in good condition, and the power battery power is in a sufficient range to avoid power failure and shutdown in the middle of the operation. At the same time, the operator should confirm that he has worn the corresponding labor protective equipment as required, and be familiar with the planned operation route, prohibited area, and special raw material storage location in the raw material warehouse on the day in advance. After confirming that there is no objection, the vehicle can be started to enter the site. It is strictly forbidden to directly enter the storage operation area

During the operation stage of the vehicle driving in the warehouse, it is necessary to maintain a low-speed passage throughout the whole process, avoid the ground inspection personnel and temporarily placed material transfer pallets in the warehouse at any time, and sound a warning in advance when encountering blind spots such as corners and columns to confirm that there are no personnel or obstacles before passing smoothly. When carrying out the operation of raw materials on and off the shelves, it is necessary to confirm in advance that the depth of the fork inserted into the pallet meets the safety requirements, and the lifting process keeps the body stable to avoid material pollution caused by material shaking and spilling. For the transshipment needs of special controlled raw materials, it is necessary to strictly follow the exclusive route guided by the warehouse management personnel. It is strictly forbidden to drive into the sensitive control area where raw materials are stored without permission. During the operation, all kinds of pipelines and temperature and humidity sensing equipment laid in the warehouse must not be touched at will.

After all the operations are completed on the same day, the operator should park the industrial-grade forklift to the designated charging parking area, drop the fork to a safe height close to the ground, pull the handbrake to complete the power-off operation, and clean the floating dust attached to the appearance of the vehicle. Synchronously register the working time of the day, the category of transshipped materials, and whether there is any abnormality in the operation of the vehicle, which is convenient for the follow-up operation and maintenance personnel to carry out regular maintenance to ensure that the equipment is in good working condition for a long time. After the whole set of operation specifications is implemented, it can be well adapted to the special control requirements of the raw material warehouse of Shijiao New Materials, taking into account the operation efficiency and safety compliance, and providing reliable support for the stable