BYD EL-Pro18 MAX is a 1.8-ton ride-on lithium-ion balance electric forklift, equipped with BYD's mature three-electric technology and industrial manufacturing process, the whole machine is well-balanced, stable in structure, flexible in control, safe and perfect, suitable for warehousing and logistics, light manufacturing, food cold chain, factory turnover and other medium and light material handling and stacking conditions, providing enterprises with stable, low-maintenance green handling equipment solutions.

Core machine parameters

BYD EL-Pro18 MAX is a general-purpose industrial handling equipment, suitable for a variety of indoor and outdoor routine operation scenarios. The vehicle size, load, passability, and power parameters are balanced and practical. The core specifications are as follows:

• Rated load: 1.8 t, load center distance 500 mm
  

• Operation form: ride-on electric counterweight structure
  

• Vehicle weight (including battery): 3160 kg, with reasonable counterweight layout and good operating stability
  

• Standard lifting height: 3000 mm, gantry lifting height up to 4040 mm, to meet the needs of conventional stacking, loading and unloading operations
  

• Free lifting height: 120mm, suitable for low-rise high, closed shelf operation scenarios
  

• Door frame closing height: 2030 mm, top frame height 2054 mm, suitable for most factories and warehouses
  

• Body size: vehicle width 1130 mm, excluding fork length 2210 mm, compact body structure
  

• Turning radius: 2010 mm, flexible steering, suitable for medium and small channel densification operations
  

• Ground clearance: 105 mm at the gantry and 90 mm at the frame, suitable for conventional bumpy road and ramp traffic
  

• Channel adaptability: 1000 1200 mm horizontal tray adaptable channel width 3580 mm, 800 1200 mm vertical tray adaptable channel width 3790 mm, suitable for standardized storage layout
  

Power and lithium battery configuration, suitable for multi-shift continuous operation

The equipment is equipped with BYD lithium battery system, equipped with 80 V/270 Ah large-capacity battery, the battery weight is 210 kg, and the battery life can meet the multi-shift continuous operation of the enterprise. The battery is designed with a low-maintenance structure, which does not require frequent water replenishment and maintenance, effectively reducing the daily operation and maintenance costs of the equipment.

The vehicle is equipped with an AC electronic control system, matching a 9.5 kW drive motor and a 16 kW lift motor, resulting in a smooth and linear power output. No-load and full-load travel speeds can reach 16 km/h; full-load lifting speed 420 mm/s, no-load 450 mm/s, full-load descending speed 520 mm/s, no-load 480 mm/s, smooth cargo lifting and stable operation circulation efficiency.

The vehicle has good climbing performance, with 16% full-load climbing capacity and 20% no-load climbing capacity. It can be adapted to factory ramps, loading and unloading platforms and other sloping roads to meet the needs of indoor and outdoor composite working conditions. Full-load acceleration time 6.0 s, no-load acceleration time 5.0 s, stable start and stop, suitable for high-frequency reciprocating handling operations.

III. Body structure and passing performance, strong adaptability to working conditions

The car adopts a high-strength frame structure with a scientific axle load ratio. The full-load front axle load is 4110 kg, the rear axle load is 850 kg, the no-load front axle load is 1312 kg, and the rear axle load is 1848 kg. The operation stability is good. The door frame supports forward tilt 5 and backward tilt 8, which is convenient for cargo alignment and reduction of the risk of cargo slipping.

The equipment is equipped with SE industrial wear-resistant tires, with front wheel specifications of 6.00-9 and rear wheel specifications of 16-6-8, suitable for conventional pavements such as cement and asphalt in the factory area. The wheelbase of the whole vehicle is 1450 mm, the front and rear wheelbases are 970 mm and 850 mm respectively. The chassis has a reasonable layout and flexible steering, which can adapt to narrow passages and dense shelf storage operation scenarios.

Standard 40/100/1070 mm standard fork, in line with ISO2328 industry standards, fork rack width 1000 mm, suitable for general standard pallets, versatility, can meet the needs of conventional cargo handling and stacking operations.

IV. Safety and control design, safe operation

The whole vehicle adopts hydraulic braking system, which is sensitive and stable, and is suitable for high-frequency start-stop operation conditions. The working pressure of the hydraulic system ≤ 160 MPa, and the operation is stable, which can effectively reduce the probability of failure and prolong the service life of hydraulic components.

The noise reduction performance of the whole vehicle is good, and the noise at the driver ≤ 75 dB (A), which effectively optimizes the working environment. The equipment is equipped with a compliance top frame and a transparent door frame, which has a wide working field of vision, reduces visual blind spots, and reduces the probability of operation errors.

Relying on a mature AC electronic control system, the equipment operates stably and can be adapted to normalized and standardized industrial operations, contributing to the continued reliable operation of the equipment.

Ergonomic design, suitable for long-term work

The equipment adopts ergonomic seat design, the seat is 1000 mm above the ground, and with the chassis shock absorption structure, it can buffer the bumps in the road surface and reduce the fatigue of long-term operation. The whole machine has a regular operation layout, clear gears, light operation, simple operation, wide field of vision, and is suitable for high-intensity continuous operation in factories and warehouses.

Applicable scenarios

BYD EL-Pro18 MAX electric forklift is suitable for e-commerce warehousing, logistics transshipment, light manufacturing, food cold chain, factory turnover, supermarket warehouses and other multi-industry scenarios, and can operate stably in room temperature indoor and conventional outdoor working conditions. It is suitable for the green and low-maintenance material handling needs of enterprises.